More about cookies: www.aboutcookies.org
|0°||255||250||300 x 220|
|45° >||200||190||190 x 170|
|< 45°||160||160||190 x 100 - 150x170|
|60°>||110||110||110 x 130|
NEW BANDSAWING MACHINE HIGH DUTY SUPER TRAD 301 SO EASY SEMI-AUTOMATIC HYDRAULIC
The saw SO EASY allows to make a complete cutting cycle without the constant presence of the operator thanks to the original hydraulic control system for the descent of the sawframe.
Limit switch to set the sawframe return just above the material to cut.
Selector to switch to the MANUAL cutting mode wiith button for the quick approach to the material to cut.
Centralized control panel in the front of the machine including luminous alarm system.
Automation is controlled by safety relay.
High efficiency hydraulic pump and low energy consumption.
Practical and reliable for all cutting needs of medium-sized ferrous materials.
Large round working table “plateau” which turns with the blade mitering guaranteeing excellent support for the material to cut. This system prevents the blade from cutting the working table as is the case with the conventional bandsaws.
Massive cast-iron vice with handwheel and quick locking lever.
The vice is equipped with a practical handle for rapid movement and is mounted on a rail to allow lateral displacement.
Possibility of cuts from 0° to 60° to the right and to 45° to the left.
Blade rotation with 2 electric speeds.
Blade tension by hand wheel and safety microswitch in case of blade breakage or insufficient blade tension.
Coolant electric pump.
Blade cleaning brush.
Manual cutting cycle:
Material lock in the vice. Quick blade approach to the material to cut, selection of blade speed and start by pressing the grip-switch. Manual sawframe pull down to execute the cut. Manual return of the sawframe to the initial position and vice opening.
Semiautomatic cutting cycle:
Selection of blade speed. Press Start / Stop cycle button on the control panel and adjustment of the downfeed speed rate on the hydraulic regulator. Automatic vice lock and material cutting. Automatic return of the sawframe to the initial position and vice opening.
Sawframe, vice and plateau in cast-iron.
Bench and pedestal made of steel plate.
Precision blade guide with tungsten carbide plates and adjustable rollers.
Gear-box in oil bath.
Adjustable bar stop tod with millimiters scale
Material support bracket
Bimetal M42 blade 2750x27x0,9 mm
Set of service spanners
CE certification and use and maintenance manual
Rollerway loading side (2 mt)
Rollerway unloading side with bar stop (2mt)
Blada lubricant nebulizer
Start cycle pedal
Technical support from the local service centre.
Thomas spare parts supply.
3Ph Electric motor
1 - 1.4
Gearbox reduction ration
2750 x 27 x 0,9
Working table height
800 x 1800 x 1600