Latviešu 
English
РусскийHS-E UPCUT SPIRAL BITS FOR ALUMINIUM Z=1 D=8;L=100;Rotazione= DX ;S=8;Z=1;B/l=14/70
HS-E UPCUT SPIRAL BITS FOR ALUMINIUM Z=1 D=8;L=100;Rotazione= DX ;S=8;Z=1;B/l=14/70
HS-E UPCUT SPIRAL BITS FOR ALUMINIUM Z=1 D=8;L=100;Rotazione= DX ;S=8;Z=1;B/l=14/70
Pieejamība:
Uz pasūtījuma
Zīmols:
SISTEMI Klein
Preces kods:
DT1252533633 Ražotāja preces kods:
U202.082.R
25,61 €
Bez PVN /
- Manufactured in HS with 5% cobalt.
- Produced with a special shear angle and reduced throat for a better chip ejection.
- Suitable for plunging, routing and trimming on aluminum profiles and extrusions.
- Especially suited for hard to reach place.
- To be used with lubricant to prevent build up.
- They all have RH rotation.
- Used for alu profiles.
Features and product variants
| Item | S | D | B/l | L | Z | Rotation |
|---|---|---|---|---|---|---|
| U202.040.R | 8 | 4 | 16/55 | 90 | 1 | RH |
| U202.050.R | 8 | 5 | 14/35 | 80 | 1 | RH |
| U202.051.R | 8 | 5 | 14/35 | 120 | 1 | RH |
| U202.052.R | 8 | 5 | 16/55 | 90 | 1 | RH |
| U202.053.R | 8 | 5 | 18/35 | 100 | 1 | RH |
| U202.054.R | 8 | 5 | 20/45 | 100 | 1 | RH |
| U202.055.R | 10 | 5 | 20/55 | 80 | 1 | RH |
| U202.056.R | 10 | 5 | 20/55 | 100 | 1 | RH |
| U202.060.R | 8 | 6 | 14/55 | 85 | 1 | RH |
| U202.061.R | 8 | 6 | 14/35 | 80 | 1 | RH |
| U202.062.R | 8 | 6 | 14/45 | 90 | 1 | RH |
| U202.063.R | 10 | 6 | 20/55 | 100 | 1 | RH |
| U202.080.R | 8 | 8 | 14/60 | 80 | 1 | RH |
| U202.081.R | 8 | 8 | 14/90 | 120 | 1 | RH |
| U202.082.R | 8 | 8 | 14/70 | 100 | 1 | RH |
| U202.083.R | 8 | 8 | 30/70 | 100 | 1 | RH |
| U202.100.R | 10 | 10 | 14/60 | 80 | 1 | RH |
| U202.101.R | 10 | 10 | 14/70 | 100 | 1 | RH |
| U202.102.R | 10 | 10 | 14/95 | 120 | 1 | RH |
| U202.103.R | 10 | 10 | 30/70 | 100 | 1 | RH |