Latviešu 
English
РусскийCOLLET CHUCKS ISO 30 D=60;D1=50;Ghiera=Z091.203.R c/cuscinetto;Pinze=Ø 3÷25;Rotazione=Dx;A=68
COLLET CHUCKS ISO 30 D=60;D1=50;Ghiera=Z091.203.R c/cuscinetto;Pinze=Ø 3÷25;Rotazione=Dx;A=68
COLLET CHUCKS ISO 30 D=60;D1=50;Ghiera=Z091.203.R c/cuscinetto;Pinze=Ø 3÷25;Rotazione=Dx;A=68
Pieejamība:
Uz pasūtījuma
Zīmols:
SISTEMI Klein
Preces kods:
DT999965221 Ražotāja preces kods:
T118.829.R
346,69 €
Ar PVN /
- Tool holders supplied with nut (without collet) and retaining pawl.
- Threaded nut DIN 6388 (EOC25-SYOZ25)
- Balanced to 24000 RPM
- Retaining pawl T118.791.R (DIN 69872) for: BUSELLATO, WEEKE, IMA, BULLERI, MAKA, COSMEC, REICHENBACHER.
- Retaining pawl T118.891.R for: BIESSE (after 09/09/92), MASTERWOOD - BULLERI (motor H.S.D.), VITAP, HITECO
- For the spring collets see out item T124; for the clamping nuts see our item Z091 (without ball bearing nut) and/or Z091 (with ball bearing nut); for the wrenches see our item Z052 (standard) and/or Z052 (torque).
- To be used on our adjustable demount device Klein® T139
- The "A" measure will be determined with clamped router bits' shanks by using both our spring collets DIN6499 and DIN6388. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
Features and product variants
| Item | A | D | D1 | Spring collets | Clamping nut | Rotation |
|---|---|---|---|---|---|---|
| T118.828.R | 68 | 60 | 50 | Ø 3÷25 (Art. T124/EOC25) | Z091.202.R | RH |
| T118.829.R | 68 | 60 | 50 | Ø 3÷25 (Art. T124/EOC25) | Z091.203.R ball bearing nut | RH |
| T118.838.R | 68 | 60 | 50 | Ø 3÷25 (Art. T124/EOC25) | Z091.202.R | RH |
| T118.839.R | 68 | 60 | 50 | Ø 3÷25 (Art. T124/EOC25) | Z091.203.R ball bearing nut | RH |