Universal Fräsmaschine Modell UFM 125 inkl. "SINO"

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

Universal Fräsmaschine Modell UFM 125 inkl. "SINO"

Svars: 
1480 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT1665219228
Bar kods: 
9004853821332
15 015,00 €
Bez PVN /
-+

Product Highlights

You will find more details about Universal milling machines - UFM series here: Universal milling machines - UFM series

Technical Facts

  • Automatic feed X/Y/Z
  • Milling capacity Ø 125/40 mm
  • Cubature 1.120 x 260 x 500 mm
  • Spindle projection 60-500 mm
  • Table travel 600x300 mm
  • Tilting milling head ±180°
  • Simple conversion to horizontal milling machine
  • Drive motor 2,200 W
  • Wide speed range
  • Right and left rotation
  • Milling spindles with precision bearings
  • Tightening spindles for high safety
  • Milling spindle protection cover
  • Smooth-running, precise cross table with T-slots and coolant channel
  • Cross table X- and Y-axis with 9 feed stages
  • Cross table Z-axis with drive
  • Centralized lubrication
  • Integrated coolant system with return line, tank in machine base
  • LED milling table lighting
  • With SINO digital position display

Substitute

This article could be an alternative for you:

Specifications

face mills milling capacity
125 mm
cubature
1,120 x 260 x 500 mm
end mills milling capacity
40 mm
mandrel holding fixture (screw mandrel)
ISO 40
rotational speed vertical
45 - 1,660 rpm
speed gradually vertical
11
rotational speed horizontal
45 - 1,660 rpm
coolant pump
90 W
speed gradually horizontal
11
T-slot / width x distance
5 / 14 x 50 mm
mandrel radius
60 - 500 mm
milling head swivel range
± 180 °
quill distance table min./max.
80 - 500 mm
horizontal spindle distance table
40 - 470 mm
router table stroke
420 mm
router table surface
1,120 x 260 mm
table length X x Y
600 x 300 mm
feeds X/Y
24 - 402 mm/min
feed steps X/Y
9
rapid traverse X/Y
-
feed Z
1.2 mm/min
motor power
2.2 W
feed drive X/Y
550 W
feed drive Z
750 W
mains connection
400 / 50-60 V/Hz
length x width
1,655 x 1,325 mm
Height
1.73 mm
Weight
1.48 kg

  • Unique '2 in 1' conceptThe

    swivel head of the UFM 125 can be adjusted at almost any angle and, in addition to normal face and shank milling operations, enables the machining of fitting surfaces and grooves in difficultspatial positions.For face milling large workpiece surfaces, the machinecan be converted to a horizontal milling machine in just a few steps (horizontal spindle on swivel head). Thanks to the high drive power of 2,200 watts, themachine is suitable for face milling cutter diameters of up to 125 mm.The machine is equipped with a cross table A. The machine is equipped with a cross table A. 11 speed stages and 9feed stages offer sufficient clearance for optimizing the cuttingspeed.Central lubrication of the guideways forrapid availability and a coolant system with tank in the machinebase are very advantageous. The UFM 125 is ideally suited for single and smallbatch processing.

  • Standard features

    position indicator SINO SDS6-3VCollet set 4, 5, 6, 8, 10, 12, 14 and 16 mm with collet chuckTool set Operatinginstructions / CE