KBM 25 S VARIO SET-Aktion bestehend aus: 1 Stk. Keilriemen-Säulenbohrmaschine Modell KBM 25 S VARIO Art. Nr. 16027 1 Stk. Schraubstock 5" / 120 mm Art.Nr. 88143 2 Stk. Spannschrauben 14mm Art. Nr. 89033 1 Stk. HSS-Spiralbohrerkasset

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

KBM 25 S VARIO SET-Aktion bestehend aus: 1 Stk. Keilriemen-Säulenbohrmaschine Modell KBM 25 S VARIO Art. Nr. 16027 1 Stk. Schraubstock 5" / 120 mm Art.Nr. 88143 2 Stk. Spannschrauben 14mm Art. Nr. 89033 1 Stk. HSS-Spiralbohrerkasset

Svars: 
90 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT1127242912
Bar kods: 
9004853160370
1 524,60 €
Ar PVN /
-+

Product Highlights

You will find more details about Bench drills and column drills - KBM Series here: Bench drills and column drills - KBM Series

Technical Facts

  • Operating lever for speed setting
  • Speed adjustment by means of variator disc
  • Telescopic drill chuck protection CE
  • LED lamp mounted on the side
  • Right/left rotation

Substitute

This article could be an alternative for you:

Specifications

drilling capacity in steel
25 mm
mandrel holding fixture (screw mandrel)
MK 3
speed range
440 - 2.200 rpm
speed gradually
continuously variable
quill stroke
150 mm
column diameter
80 mm
t-slot width
14 mm
drill table lift
475 mm
mandrel radius
215 mm
drill table swiveling
± 45 °
drill table revolving
± 180 °
quill distance table min./max.
365 mm
drilling table surface
356 x 356 mm
motor power
1.500 W
mains connection
400/50-60 V/Hz
cubature
285x285x635 mm
base plate surface
420 x 580 mm
height (total)
1.82 mm
Weight
95 kg

  • Super slim professional column drill 550 W

    With a quill spacing of 365 mm from the drilling bench, the KBM 25 S Vario allows machining of tall workpieces and finished welded components. Clamping grooves in the base plateexpand the space for tall moulded parts.

  • This is how professionals drill

    1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.

  • Serienausstattung

    - Schnellspannbohrfutter B 16, 1 - 16 mm- Kegeldorn MK 3 / B 16- Austreibkeil- Werkzeugsatz- Bedienungsanleitung / CE

  • Set-Ausstattung

    - KBM 25 S Vario- Maschinenschraubstock 5'' / 120 mm- 2 Spannschrauben 14 mm- HSS-Bohrerkassette 1-13 mm 25-tlg.