Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

Semiautomatic double mitre bandsaw SUPER TRAD 380 SO PLUS

Pieejamība:

Uz pasūtījuma

Zīmols:

THOMAS

Preces kods:

web100145

22 022,00 €

Ar PVN / gabali

CUTTING CAPACITY


0°	300	260	330 x 260
< 45°	220	180	200 x 160
45° >	260	250	270 x 200
60° >	180	170	170 x 170

The saw SO PLUS allows to make a complete cutting cycle without the constant presence of the operator through the original hydraulic control system for the descent of the sawframe.
Infinitely variable blade speed through INVERTER from 20 to 105 m/min. Analogic measurement of the starting position of the sawframe and blade tension. Limit switch to set the sawframe return just above the material to cut.
With button for the quick approach to the material to cut.

Centralized control panel in the front of the machine including a luminous alarm system. Automation is controlled by safety relay.
High efficiency hydraulic pump and low energy consumption.
Practical and reliable for all cutting needs of small and medium-sized ferrous materials. Large round working table “plateau” which turns with the blade mitering guaranteeing excellent support for the material to cut. This system prevents the blade from cutting the working table as is the case with the conventional bandsaws.
Massive cast-iron vice with handwheel and quick locking lever.
The vice is equipped with a practical handle for rapid movement and is mounted on a rail to allow lateral displacement.
Possibility of cuts from 0° to 60° to the right and to 45° to the left.
Blade tension by handwheel and analogical pressure transducer visualized on the display.
Automatic stop of the machine in case of blade breakage or insufficient tension of the blade.
Possibility to switch between automatic cutting mode to manual cutting mode.
Adjustable sawframe downfeed speed controlled by hydraulic regulator.

Touch Screen CONTROLLER with piece-counter, working hours (partial and total count) and self-diagnosis with the following functions:
- Counting of cut pieces (programmable piece-counter).
- Counting hours of partial and total work.
- Programmable cutting cycle (customization of the cutting cycle).
- Switching from automatic cutting cycle to manual cutting mode.
- Notification of status and error messages.
- Viewing of motor absorption (with Inverter option).
- Display of the blade rotation speed (with Inverter option).
- Interface Language selection (Italian - English - French - German - Spanish - more on request)

The digital controller offers three different operating functions:

Semi-automatic cutting cycle: manual vice adjustment through handwheel - semi-automatic start through pedal switch or control panel switch - the machine carries out a complete cutting cycle including vice locking, sawframe downfeed, cut, sawframe return and vice opening.

Manual cutting cycle: manual vice adjustment through handwheel - material vice locking through switch key - sawband start through gripswitch - manual sawframe pull down and cut - material vice opening through switch key.

TECHNICAL FEATURES
Vice and sawframe and plateau in cast-iron providing high stability and vibration free cutting.
Bench and pedestal made of steel plate.
Large and round working table turning along with the sawframe inclination .
Precision blade guide with tungsten carbide plates and adjustable rollers.
Gear-box in oil bath.
Side-to-side mobile vice with quick approach lever.
Electro-hydraulic components are of first choice.
Anti-corrosion treatment with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision.
Electric installation according CEE regulations.
High level machining and finishing of the parts.
Coolant electric pump. Blade cleaning brush.
Safety pressure switch, set of fuses against current overload.
Motor protected thermal feeler. Safety microswitch on the blade protection.
Severe tests are performed rigorous testing on assembling mechanical and automation that ensure a high level of performance and functionality.

STANDARD EQUIPMENT
Bar-stop with millimeter scale for measuring the length of cut.
INVERTER for cutting speed from 20 to 105 m/min.
Work support bracket for the material to be cut.
Water gun to clean the working table.
HSS bi-metal blade 3310x27x0,9mm.
Set of service spanners.
Certificate of conformity according to Machine Directive 2006/42/CE
Instruction manual with exploded view for spare parts identification.

OPTIONAL EQUIPMENT
Starting pedal.
Blade lubricant nebulizer.
Rollerway 2 meters long on loading side.
Rollerway 2 meters long on unloading side with bar stop.

TECHNICAL SUPPORT
Technical support from the local service centre.
Thomas spare parts supply.

TECHNICAL DATA

3Ph Electirc motor	kW	2.2
Electropump	kW	0.12
Hydraulic pump motor	kW	0.4
Gearbox reduction ratio	I	40/1
Flywheel diameter	mm	355
Blade dimension	mm	3310 x 27 x 0,9
Blade speed	m/1'	20/105
Vice opening	mm	340
Sawframe inclination	°	30
Working height	mm	940
Machine dimension	mm	1700 x 2150 x 2250
Weight	kg	750