KUPER SWT XS

Товар может отличаться от изображенного на картинке. На изображении могут быть детали, которые не входят в комплектацию товара.

KUPER SWT XS

Наличие: 
Пред-заказ
Бренд: 
KUPER
Код товара:
SWT XS

KUPER SWT XS planing and moulding machine
– small and unrivaled good.

KUPER SWT XS – user-friendly and smart.

The KUPER SWT XS is the unbeaten champion of simplicity and user-friendliness.

The KUPER SWT XS impresses with its generous standard equipment with the option of chamfering or profiling up to 20 mm deep. And its practical quick-clamping system ProLock® makes make-ready a walk in the park.

Advantages at a glance:

  • practical tool quick-clamping system ProLock®
  • hard-chromium plated infeed and machine table
  • feed speed infinitely controllable via frequency converter
  • end-to-end feed path, power transmission via several worm gears and cardan joints
  • feed and spindle motors designed as IE3 energy saving motors
  • pneumatically damped pressure shoe downstream of the top shaft, improved dynamics due to linear guides
  • electric height adjustment of the feed support
  • start-stop system for all spindle motors

Spindle arrangement:

XS 4

XS 4+U

XS 5

Essential for any carpenter‘s workshop – the KUPER SWT XS.

K2 Basic control system – clear & simple.

The KUPER-developed control system ensures quick and safe set-up of the SWT planing and chamfering machine.

  • 7 inch Siemens touch screen with clear symbols for simple operator guidance
  • Motor-controlled height and width adjustment, can also be controlled via additional program-independent input interface
  • Tool management
  • Program management (up to 2500 programs possible)
  • It is possible to display program values for the radial and axial positions of all spindles (for easier manual adjustment)
  • Management and monitoring of maintenance intervals with a graphical display of lubricating points

Basic equipment

Hard-chromium plated work surfaces
All table surfaces of the KUPER SWT XS are hard-chromium plated to ensure precise results. This ensures durability and guarantees precise locating surfaces.

Basic equipment

Fast tool changing thanks to ProLock®
Required tool changes on all spindles are quick and easy due to the ProLock® clamping system.

openTechnical Data KUPER SWT XS

Working width 15 – 230 mm
Working height 10 – 120 mm
Feed speed 6 – 24 m/min.
Axial adjustment path horizontal spindle 20 mm, vertical spindle 20 mm
Spindle arrangement 4, 4+U, 5
Spindle power rating bottom und top 5.5 kW, right and left 7.5 kW (one motor for both vertical spindles)
Universal spindle 7.5 kW
Spindle rotational speed 6.000 U/min.
Spindle diameter 40 mm
Spindle diameter first bottom spindle 125 – 160 mm, vertical 112 – 180 mm
top spindle 112 – 200 mm, bottom spindle 112 – 200 mm
Profile chamfering depth up to 20 mm